MEGA 2560 ETH R3 with ATmega2560 & W5500 (Arduino-compatible board) Angle top

MEGA 2560 ETH R3 with ATmega2560 & W5500 (Arduino-compatible board)

AC Light Dimmer Module, 2 Channel, 3.3V/5V logic, AC 50/60hz, 220V/110V Angle-Front

AC Light Dimmer Module, 2 Channels, 3.3V/5V logic, AC 50/60hz, 220V/110V

Nano V3 Ethernet Shield - W5500 (V2)

If you're looking to build a network-connected device with Arduino Nano is the best solution for you!

$9.99
Availability: In stock
SKU
6970622936831
  • Buy 5 for $9.33 each and save 7%
  • Buy 15 for $8.67 each and save 13%
  • Buy 35 for $8.01 each and save 20%

If you're looking to build a network-connected device with Arduino Nano is the best solution for you!

Ethernet Shield W5500 features the Ethernet controller based on WizNet W5500 TCP/IP. WizNet W5500 is a TCP/IP embedded Ethernet controller. It provides TCP/IP Stack, 10BaseT/100BaseTX Ethernet with full or half-duplex, MAC and PHY. W5500 is using a highly efficient SPI protocol, with 80MHz clocks for high-speed connectivity to Arduino Nano. For lower energy consumption, W5500 provides WOL (Wake on LAN) and Power Off modes.

Arduino library: Ethernet.h/Ethernet2.h/ Ethernet3.h

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account

Specifications

Ethernet W5500
Shield For Nano
Operating temperature -40C°/+85C°
Length×Width 65×17.8mm

Documents

Dimensional drawing (DIM)

Size Nano V3 Ethernet Shield - W5500 (V2) Dimensional drawing (DIM) Nano V3 Ethernet Shield - W5500 (V2)

Input and Output (I/O) diagram

Input and Output (I/O) diagram I/O Nano V3 Ethernet Shield - W5500 (V2) Input and Output (I/O) Nano V3 Ethernet Shield - W5500 (V2)

Schematic

Schematics Nano V3 Ethernet Shield - W5500 (V2)