Обратите внимание на множество настроек!
0
0 Favorites
0
10:36:59 - 22.11.2017

MEGA+WiFi R3 ATmega2560+ESP8266, flash 32MB, USB-TTL CH340G, Micro-USB

MEGA+WiFi R3 ATmega2560+ESP8266, flash 32MB, USB-TTL CH340G, Micro-USB
MEGA+WiFi R3 ATmega2560+ESP8266, flash 32MB, USB-TTL CH340G, Micro-USB
MEGA+WiFi R3 ATmega2560+ESP8266, flash 32MB, USB-TTL CH340G, Micro-USB
MEGA+WiFi R3 ATmega2560+ESP8266, flash 32MB, USB-TTL CH340G, Micro-USB
MEGA+WiFi R3 ATmega2560+ESP8266, flash 32MB, USB-TTL CH340G, Micro-USB
MEGA+WiFi R3 ATmega2560+ESP8266, flash 32MB, USB-TTL CH340G, Micro-USB
MEGA+WiFi R3 ATmega2560+ESP8266, flash 32MB, USB-TTL CH340G, Micro-USB
Available
Price:
$12.99
Characteristics

It is a castomise version of the classic ARDUINO MEGA R3 board. Full integration of  microcontroller Atmel ATmega2560 and IC Wi-Fi ESP8266 with 8 MB flash memory, and USB-TTL converter CH340G on one board. All modules can work together or independed.


On the board there the switch of mode of operation with 8 position


Switch status and mode selection:

 

1

2

3

4

5

6

7

8

CH340 connect to ESP8266 (upload sketch)

OFF

OFF

OFF

OFF

ON

ON

ON

NoUSE

CH340 connect to ESP8266 (connect)

OFF

OFF

OFF

OFF

ON

ON

OFF

NoUSE

CH340 connect to ATmega2560 (upload sketch)

OFF

OFF

ON

ON

OFF

OFF

OFF

NoUSE

CH340 connect to Mega2560 COM3 connect to ESP8266

ON

ON

ON

ON

OFF

OFF

OFF

NoUSE

Mega2560+ESP8266

ON

ON

OFF

OFF

OFF

OFF

OFF

NoUSE

All modules work independed

OFF

OFF

OFF

OFF

OFF

OFF

OFF

NoUSE

    

Also have switch for change of connecting port between ATmega2560 and ESP8266


After choosing the mode of the board, can proceed to setting up the IDE

It is important that when the ESP8266 module is programming, it is necessary to press the button “Mode”


To begin open the Arduino IDE programming environment and go to settings


Then in the window that appears in the row Additional Boards Manager URLs (marked in red) insert http://arduino.esp8266.com/stable/package_esp8266com_index.json link for installation in Arduino IDE additional scripts that would work with the modules ESP8266, and click OK

 

Then go to the Tools> Board> Boards Manager


In the window that appears, scroll through the list down to the script esp8266 by ESP8266 Community and click.


In the lower right corner will be able to select the version of the software, select the version 2.1.0 (the newest) and click the Install button


After installation, close the window and go to Tools> Board and see the list of available devices on the chip programming ESP8266


Next, you need to select the card as shown in the picture (Generic ESP8266 module)

 


Select the upload speed - 115200

 



==========test sketch===========

 void setup()

{

  Serial3.begin(115200);

  pinMode(13,OUTPUT);

  delay(500);

  Serial3.println("AT+CIPMUX=1");

  delay(2000);

  Serial3.println("AT+CIPSERVER=1,5000");

  delay(2000);

  Serial3.println("AT+CIPSTO=3600");

  delay(2000);

}

 

void loop()

{

   while(Serial3.available())

  {

    char Rdata;

    Rdata=Serial3.read();

    if(Rdata=='A'|Rdata=='a')

    {

      digitalWrite(13,HIGH);

      delay(50);

    }

    else if(Rdata=='B'|Rdata=='b')

    {

      digitalWrite(13,LOW);

      delay(10);

      digitalWrite(13,HIGH);

      delay(10);

      digitalWrite(13,LOW);

    }

    else

    {

      digitalWrite(13,LOW);

    }

  }

}

Item weight37 g
Characteristics list MEGA+WiFi R3 ATmega2560+ESP8266, flash 32MB, USB-TTL CH340G, Micro-USB