Catalog

Set Descending Direction
View as List Grid

52 items

Page
per page
  1. Dimmer module for 16/24A 600V High Load, 1 Channel, 3.3V/5V logic
    The AC Dimmer is designed to control the alternating current voltage, which can transfer current up to 600V 16/24A. In most cases, Dimmer is used to turning the power ON/OFF for lamps or heating elements, it can also be used in fans, pumps, air cleaners, e.t.c. Learn More
    As low as $5.99
  2. DIN rail Dimmer Module, 2 Channels, AC 8A/300V per channel, 3.3V/5V logic
    DIN rail Dimmer Module for control of lamps, motors, heaters, 2 Channels, 3.3V/5V logic, AC 300V/8A load Learn More
    As low as $7.78
  3. DIN rail Dimmer Module, 4 Channels, AC 8A/300V per channel, 3.3V/5V logic
    DIN rail Dimmer Module for control of lamps, motors, heaters, 4 Channels, 3.3V/5V logic, AC 300V/8A load Learn More
    As low as $11.69
  4. Embed Dimmer Module, for DIY microcontrollers projects
    The AC Dimmer is designed to control the alternating current voltage, which can transfer current up to 16A (version for 16A) 600V. In most cases, Dimmer is used to adjusting of AC power for lamps or heating elements, it can also be used in fans, pumps, air cleaners, e.t.c. Learn More
    As low as $2.69
  5. Embedded SSR AC 600V - SSR - solid state relay AC Switch (relay), 3.3V~12V logic
    If you need AC power control (lights, home equipment), this module can help you with that. Learn More
    As low as $1.49
  6. Mechanical End-stop for 3D and CNC machine (Assembled with wires 60 cm)
    Rating:
    100% of 100
    Mechanical End-stop for 3D and CNC machine with jumper wires 60cm Learn More
  7. Nano V3 Ethernet Shield - W5500 (V2)
    Rating:
    100% of 100

    If you're looking to build a network-connected device with Arduino Nano is the best solution for you!

    Learn More
  8. Opto Coupler Optical End-stop for 3D and CNC machine

    The optical endstop is the best solution for any type of 3D printers and other CNC or 3D tools.

    Learn More
    As low as $0.89
  9. Opto Coupler/Interrupter module
    Rating:
    88% of 100
    OptoCoupler - photo interrupter module Learn More
  10. PoE passive module Vin=12-48V, Vout=9V
    Rating:
    100% of 100

    PoE (Power over Ethernet) - is a technology that allows you to transfer power and data through a single Ethernet cable. All that is required is to connect a PoE-issuing device to a PoE-powered device via an RJ-45 network connector. Paired with a controller board, this module will allow you to power your project via Ethernet.

    Learn More
  11. RFID module, MFRC522 with UART, SPI, I2C interface
    Rating:
    100% of 100
    The MFRC522 is an RF Module that consists of an RFID reader, RFID card and a key chain. The module operates 13.56MHz and supports 3 types of interfaces: SPI, UART and I2C. For example using I2C interface will allow you to connect plenty of RFID devices on just 2 wires. Learn More
Set Descending Direction
View as List Grid

52 items

Page
per page